Male pipe adaptor 1/8in M-NPT x 1/16in int 1mm bore SS

Male pipe adaptor 1/8in M-NPT x 1/16in int 1/16in through bore SS

Male pipe adaptor 1/8in M-NPT x 1/8in int 1mm bore SS

Male pipe adaptor 1/4in M-NPT x 1/16in int 1mm bore SS

Male pipe adaptor 1/4in M-NPT x 1/8in int 2mm bore 316SS

Right angle drive close mount

Standard reducing ferrule 1/8in x 1/16in PEEK

Standard reducing ferrule 1/8in x 1/16in Polyimide Valcon

- RQX Series Male Open Flow Connector 600 Series Barb 1/2in (12.7 mm) ID Tubing Animal-Free Polypropylene Silicone O-Ring

1/4-28 UNF Thread with 5/16in Hex to 200 Series Barb 1/8in (3.2 mm) ID Tubing White Nylon

1/4-28 UNF Thread with 5/16in Hex to Classic Series Barb 3/16in (4.8 mm) ID Tubing White Nylon

Check Valve 200 Series Barbs 3/32in (2.4 mm) ID Tubing x 3/32in (2.4 mm) ID Tubing Cracking Pressure <= .087 psig Flow Rate >= 150 ml/min White and Clear MABS w/Silicone Diaphragm

4 mpos dead-end path MW manual 1/8 x 1mm 200C/400psi gas N60/E

4 mpos dead-end path manual 1/8 x .75mm 75C/5000psi liq N60/E

4 mpos dead-end path manual 1/8 x .75mm 175C/400psi gas N60/P

6 mpos dead-end path manual 1/8 x .75mm 75C/5000psi liq N60/E

8 mpos dead-end path manual 1/8 x .75mm 75C/5000psi liq N60/E

16 mpos flow-through MW manual 1/8 x 1mm 200C/200psi gas N60/E

1-1/2in ID Straight Graphite Ferrule
(Standard Design for Swagelok Imperial Fitting : 1-1/2in OD Tube)

4 mpos flow-through MW manual 1/8 x 1mm 200C/200psi gas N60/E

10mm ID Straight Graphite Ferrule
(Standard Design for Swagelok Metric Fitting : 10mm OD Tube)

14.2mm ID Graphite Ferrule
(H2Site Custom Design)

14.3mmID Graphite Ferrule
(Custom Design for 14mm Swagelok Metric Fitting)

14.4mm ID Graphite Ferrule
(Custom Design for 14mm Swagelok Metric Fitting)